|
        |
|
|
MORSE TAPER FINISHING REAMER (Straight Flute)
(Socket Reamer)
-
Used for Finishing.
-
Available with Straight Shank or
Taper Shank.
-
Taper Shank is used for production
Machine Reaming of Tapered Holes for Morse Taper Shanks
-
Straight shank is used for
finishing or removal of burrs and nicks in machine spindles.
-
Made from High Speed Steel.
-
Square end on Straight shank
allows reamer to be held in a Tap Wrench.
|
Hand Type
Item Code No. |
Machine Type
Item Code No. |
Diameter of Reamer |
Overall Length |
|
Size |
Small
End |
Large End |
Flute Length |
Hand Type |
Machine Type |
|
ABM-CT-2501 |
ABM-CT-2507 |
0 MT |
.2503" |
.3674" |
2-1/4" |
3-3/4" |
5-11/32" |
|
ABM-CT-2502 |
ABM-CT-2508 |
1 MT |
.3674" |
.5170" |
3" |
5" |
6-5/16" |
|
ABM-CT-2503 |
ABM-CT-2509 |
2 MT |
.5696" |
.7444" |
3-1/2" |
6" |
7-3/8" |
|
ABM-CT-2504 |
ABM-CT-2510 |
3 MT |
.7748" |
.9881" |
4-1/4" |
7-1/4" |
8-7/8" |
|
ABM-CT-2505 |
ABM-CT-2511 |
4 MT |
1.0167" |
1.2893" |
5-1/4" |
8-1/2" |
10-7/8" |
|
ABM-CT-2506 |
ABM-CT-2512 |
5 MT |
1.4717" |
1.8005" |
6-1/4" |
9-3/4" |
13-1/8" |
 |
|
